Volkswagen Golf/Jetta 2 manual

Air cleaner unit - removal and refitting
Fuel and exhaust systems - carburettor models / Air cleaner unit - removal and refitting


1.05 and 1.3 litre engines 1 Remove the element.

2 Unscrew the nut(s) securing the air cleaner body and remove the adapter or retaining ring (see illustration).

3.2 Removing air cleaner body retaining ring - 1.3 litre
3.2 Removing air cleaner body retaining ring - 1.3 litre

3 Note the location of all hoses and tubes then disconnect them. Withdraw the air cleaner body from the carburettor and remove the sealing ring (see illustrations).

3.3a Disconnecting temperature sensor hose . . .
3.3a Disconnecting temperature sensor hose . . .

3.3b . . . and crankcase emission hose - 1.3 litre
3.3b . . . and crankcase emission hose - 1.3 litre

4 Refit in the reverse order of removal, ensuring that all hose connections are securely made.

1.6 and 1.8 litre engines 5 Remove the element.

6 Unclip and detach the air hose at the side of the cleaner body (see illustration).

3.6 Air cleaner components Ц 1.6 and 1.8 litre
3.6 Air cleaner components Ц 1.6 and 1.8 litre

7 Undo the retaining nut at the top and lift the cleaner unit clear, disconnecting the remaining hoses.

8 Refit in the reverse order of removal. Fit a new sealing washer if the old one has perished or distorted.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.