General information and precautions

Fuel and exhaust systems - Digijet fuel injection / General information and precautions

General information
The Digijet fuel injection system is fitted to the 1.3 litre (code NZ) engine (see illustrations).

1.0a Digijet fuel injection system component location

1.0b Digijet fuel injection system components

The system is regulated in accordance with instructions received from a control unit, located in the bulkhead plenum chamber on the left-hand side. This unit was modified in July of 1989 and can be identified by a blue sticker on the unit, earlier units having a copper-brown sticker.

The fuel pump and its location is identical to that described in Part F of this Chapter for the Digifant fuel injection system.

The fuel tank and its associated components are identical to those shown in Part A of this Chapter, the only difference being the feed line attachment to the gravity valve from the charcoal filter.

Precautions
Refer to Sections 1 and 2 in Part B of this Chapter.