Throttle stop - adjustment

Fuel and exhaust systems - Digifant fuel injection / Throttle stop - adjustment

1 Throttle stop adjustment is initially set at the factory and should not be tampered with.

However, if it is accidentally disturbed, proceed as follows.

2 Back off the adjustment screw until a gap exists between the carrier lever and stop lever (see illustration).

6.2 Throttle stop adjustment

3 Turn the adjustment screw until the two levers just make contact, then continue to turn it a further half-turn. Tighten the locknut.

4 After making an adjustment, readjust the throttle valve switches, and the idle speed and mixture.