Volkswagen Golf/Jetta 2 manual

Hydraulic pipes and hoses - renewal
Braking system / Hydraulic pipes and hoses - renewal


1 To remove a rigid brake pipe, unscrew the union nuts at each end and where necessary, remove the line from its retaining clips.

Refitting is a reversal of removal.

2 To remove a flexible brake hose, unscrew the union nut securing the rigid brake pipe to the end of the flexible hose and remove the spring clip and hose end fitting from the bracket (see illustration). Unscrew the remaining end from the component or rigid pipe according to position. Refitting is a reversal of removal.

11.2 Rigid pipe-to-flexible hose connection
11.2 Rigid pipe-to-flexible hose connection

3 Bleed the complete hydraulic system after fitting a brake pipe or hose.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.