Volkswagen Golf/Jetta 2 manual

Steering lock - removal and refitting
Suspension and steering / Steering lock - removal and refitting


Removal
1 Disconnect the battery negative lead.

2 Remove the steering wheel.

3 Remove the screws and withdraw the steering column lower shroud.

4 Remove the three screws and withdraw the combination switch. Disconnect the wiring plug.

5 Using an Allen key, unscrew the clamp bolt securing the steering lock.

6 Prise the lockwasher from the inner column and remove the spring and contact ring.

7 Disconnect the wiring plug and withdraw the steering lock from the top of the column, together with the upper shroud. Note that the ignition key must be inserted to ensure that the lock is in its released position.

8 Remove the screw and withdraw the switch from the lock housing.

9 To remove the lock cylinder, drill a 3.0 mm diameter hole in the location shown (see illustration). Depress the spring pin and extract the cylinder.

13.9 Drilling position when removing steering lock cylinder
13.9 Drilling position when removing steering lock cylinder

a = 12.0 mm
b = 10.0 mm

Refitting
10 Refitting is a reversal of removal. Renew the inner column lockwasher and press it fully onto the stop while supporting the lower end of the column.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.