Volkswagen Golf/Jetta 2 manual

Door trim panel - removal and refitting
Bodywork and fittings / Door trim panel - removal and refitting


Removal
1 Unscrew and remove the door locking knob (see illustration).

14.1 Unscrewing door locking knob
14.1 Unscrewing door locking knob

2 Remove the inner handle surround by sliding it to the rear (see illustration).

14.2 Removing door inner handle surround
14.2 Removing door inner handle surround

3 Prise the cover from the door pull with a small screwdriver, remove the cross-head screws and withdraw the door pull (see illustrations).

14.3a Removing door pull cover
14.3a Removing door pull cover

14.3b Removing door pull retaining screws
14.3b Removing door pull retaining screws

4 Note the position of the window regulator handle with the window shut then prise off the cover, remove the cross-head screw and withdraw the handle and washer (see illustrations).

14.4a Remove window regulator handle cover . . .
14.4a Remove window regulator handle cover . . .

14.4b . . . and handle retaining screw
14.4b . . . and handle retaining screw

5 Where applicable, prise free the door mirror adjuster knob and remove the gaiter (see illustration).

14.5 Removing door mirror adjuster knob
14.5 Removing door mirror adjuster knob

6 Remove the self-tapping screws and withdraw the storage compartment panel (where applicable).

7 Prise out the stoppers and remove the cross-head screws from the trim panel (see illustrations).

14.7a Remove stoppers (where necessary) for access to trim panel screws
14.7a Remove stoppers (where necessary) for access to trim panel screws

14.7b Trim panel retaining screw removal (rear edge)
14.7b Trim panel retaining screw removal (rear edge)

8 Using a wide-bladed screwdriver, prise the trim panel clips from the door whilst taking care not to damage the panel. Remove the panel.

9 Remove the window regulator handle packing (where applicable).

10 Carefully prise free the plastic cover for access to the inner door components (see illustration).

14.10 Plastic cover peeled back for access to door components
14.10 Plastic cover peeled back for access to door components

Refitting
11 Refitting is a reversal of removal. It is recommended that the window regulator handle retaining screw is locked by coating its threads with a liquid locking agent.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.