Volkswagen Golf/Jetta 2 manual

Central locking system - component removal and refitting
Bodywork and fittings / Central locking system - component removal and refitting


1 The central locking system fitted to some models comprises the following (see illustration):

19.1 Central locking system Ц left-hand drive shown
19.1 Central locking system Ц left-hand drive shown

a) Pressure/vacuum pump b) Control element - on driverТs door c) Shift elements - on remaining doors and fuel tank flap
d) Interconnecting tubing.

2 To remove the pressure/vacuum pump, release the rubber strap in the luggage compartment, remove the cover, then withdraw the pump and disconnect the wiring and tube.

3 To remove a control or shift element, first remove the door, tailgate, or luggage compartment trim panel (as appropriate). On door elements, carefully peel back the protective foil. Remove the element mounting screws and disconnect the tubing. On the driverТs door only, disconnect the wiring.

Disconnect the operating rod (except on the fuel tank flap) and withdraw the element.

4 Refitting is a reversal of removal. Ensure that the door protective foil is firmly stuck to prevent water penetration and use doublesided tape to secure it if necessary.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.