Volkswagen Golf/Jetta 2 manual

Bumper trim covering - removal and renewal
Bodywork and fittings / Bumper trim covering - removal and renewal


1 Remove the bumper concerned.

2 Use a suitable lever to carefully prise free the old covering from the bumper.

3 To fit the new covering, locate the covering on the bumper then support the covering and bumper with the covering underneath (bumper inverted). Use a firmly padded support if possible to protect the new covering.

4 Press or tap the bumper down onto the covering so that the securing clips engage in the bumper. Start from the centre and work progressively outwards, alternating from side to side.

5 Refit the bumper on completion.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.