Front wheel housing liner - removal and refitting

Bodywork and fittings / Front wheel housing liner - removal and refitting

1 Raise the front of the vehicle and support it on axle stands (see “Jacking and vehicle support”).

2 Remove the roadwheel from the side concerned.

3 Remove the two cross-head screws from the positions indicated (see illustration).

25.3 Remove wheel housing liner retaining screws (arrowed)

4 Swivel the liner 90° downwards and pull it free from the elongated hole.

5 Undo and remove the cross-head screws (with washers) from the points indicated (see illustration) then withdraw the liner after disengaging its location peg “A” from the leading lower edge.

25.5 Wheel housing liner securing screw locations (arrowed)

6 Renew any retaining screw location rivets which are damaged.

7 Refit in the reverse order of removal.