Front wing - removal and refitting

Bodywork and fittings / Front wing - removal and refitting

1 A damaged front wing may be renewed complete. First, remove the front bumper.

2 Remove the screws and withdraw the liner from inside the wing.

3 Where applicable, disconnect/remove the wing-mounted radio aerial.

4 Remove all the screws and lever the wing from the guides (see illustration). If necessary, warm the sealing joints with a blowlamp to melt the adhesive underseal whilst observing the necessary fire precautions.

26.4 Front wing retaining screw positions (Jetta)

5 Clean the mating faces and treat with rust inhibitor if necessary.

6 Apply sealant along the line of the screws before fitting the wing. Once in place, apply underseal as necessary.

7 Paint the wing then fit the liner and front bumper.