Volkswagen Golf/Jetta 2 manual

Centre console - removal and refitting
Bodywork and fittings / Centre console - removal and refitting


1 Disconnect the battery earth lead.

2 Unscrew and remove the gear lever knob then unclip and withdraw the gaiter.

3 Undo the retaining screws and pull free the console from its guides at the rear.

Disconnect any console switch lead connectors (see illustration).

29.3 Centre console retaining screw (arrowed) and guide locations (A)
29.3 Centre console retaining screw (arrowed) and guide locations (A)

4 Refit in the reverse order of removal. Check the operation of the console switches (where fitted) on completion.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.