Volkswagen Golf/Jetta 2 manual

Seat belts - renewal
Bodywork and fittings / Seat belts - renewal


1 When removing each seat belt anchor bolt, note carefully the fitted order of the washers, bushes and anchor plate for reference during reassembly (see illustrations).

33.1a Front seat belt anchorage to sidemember
33.1a Front seat belt anchorage to sidemember

Spring end (1) points to upper recess of belt link and is then tensioned 270° and hooked onto link pin

33.1b Front seat belt anchorage to B pillar (lower)
33.1b Front seat belt anchorage to B pillar (lower)

33.1c Front seat frame anchorage
33.1c Front seat frame anchorage

33.1d Front seat belt anchorage to B pillar (upper)
33.1d Front seat belt anchorage to B pillar (upper)

33.1e Rear seat belt anchorage to floor
33.1e Rear seat belt anchorage to floor

33.1f Rear seat belt anchorage to C pillar
33.1f Rear seat belt anchorage to C pillar

2 Note that from early 1986, some models are fitted with front seat belts incorporating height adjustment of the B pillar attachment point (see illustration).

33.2 Height-adjustable seat belt components
33.2 Height-adjustable seat belt components

3 These adjustable seat belts can be fitted to any model having a chassis number later than 16/19 G 054 900, but a new B pillar trim must also be fitted.

4 Never modify a seat belt or alter its attachment point to the body.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.