Volkswagen Golf/Jetta 2 manual

Front foglight bulb and unit - removal and refitting
Body electrical systems / Front foglight bulb and unit - removal and refitting


1 To remove the bulb, pull back the rubber cover from the rear of the lamp unit, compress the bulb retaining spring clip and release it.

2 The bulb can now be withdrawn whilst taking care not handle its glass with the fingers (see illustration).

7.2 Bulb and holder removal from foglight
7.2 Bulb and holder removal from foglight

3 The foglight unit can be removed in a similar manner to that described for the headlamps.

4 Refit in the reverse order of removal and check lamp operation on completion. If necessary, adjust beam alignment by means of the adjustment screws (see illustration).

7.4 Foglight beam alignment adjuster screws (arrowed)
7.4 Foglight beam alignment adjuster screws (arrowed)

5 Foglight alignment should be carried out by a VW dealer with the proper beam setting equipment. In an emergency, follow the procedure given for the headlamps.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.