Volkswagen Golf/Jetta 2 manual

Warning lamp cluster - removal and refitting
Body electrical systems / Warning lamp cluster - removal and refitting


1 Disconnect the battery earth lead.

2 Remove the facia control switches then, reaching through the vacant switch apertures in the facia, compress the retainers and push out the warning lamp cluster unit (see illustration).

10.2 Warning lamp cluster removal
10.2 Warning lamp cluster removal

3 Disconnect the multi-plug for full cluster removal.

4 Withdraw the warning light bulbholder from the cluster and pull free the bulb for inspection and, if necessary, renewal (see illustration).

10.4 Warning lamp cluster bulbholder removal
10.4 Warning lamp cluster bulbholder removal

5 Where two or more warning lamp bulbs are contained in a single mounting plate, the plate unit complete must be renewed as it is not possible to renew a single bulb in this instance.

6 Refit in the reverse order of removal. On completion, check the operation of the switches and warning light bulb(s).


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.