Speedometer cable - removal and refitting

Body electrical systems / Speedometer cable - removal and refitting

1 Open the bonnet and then reach down and unscrew the speedometer cable nut from the transmission.

2 Withdraw the instrument panel far enough to disconnect the cable.

3 Remove the air cleaner.

4 Carefully unclip and detach the plastic cover from the top edge of the bulkhead. Pull the speedometer cable through the bulkhead and withdraw it from the engine compartment side.

5 Refitting is a reversal of removal. Ensure that the grommet is correctly fitted in the bulkhead and that there are no sharp bends in the cable. Do not grease the cable ends.