Volkswagen Golf/Jetta 2 manual

Windscreen wiper linkage - removal and refitting
Body electrical systems / Windscreen wiper linkage - removal and refitting


1 Disconnect the battery negative lead.

2 Remove the wiper arms, then unscrew the bearing nuts and remove the spacers (see illustrations).

29.2a Windscreen wiper components
29.2a Windscreen wiper components

29.2b Rear window wiper components
29.2b Rear window wiper components

3 Pull the weatherstrips from the front of the plenum chamber and remove the plastic cover.

4 Disconnect the wiring multi-plug.

5 Unscrew the frame mounting bolt, then withdraw the assembly from the bulkhead.

6 Prise the pullrods from the motor crank and bearing levers.

7 Unbolt the wiper motor from the frame.

8 Refitting is a reversal of removal. Lubricate the bearing units and pullrod joints with molybdenum disulphide grease.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.