Volkswagen Golf/Jetta 2 manual

Radio/cassette player - removal and refitting
Body electrical systems / Radio/cassette player - removal and refitting


1 Disconnect the battery earth lead.

2 To withdraw the radio/cassette unit from its aperture, you will need to fabricate a pair of U-shaped extractors from wire rod of suitable gauge to insert into the withdrawal slots on each side of the unit (see illustration).

31.2 Radio/cassette extractor tool
31.2 Radio/cassette extractor tool

3 Insert the withdrawal tools then, pushing each outwards simultaneously, pull them evenly to withdraw the radio/cassette unit. It is important that an equal pressure is applied to each tool as the unit is withdrawn.

4 Once withdrawn from its aperture, disconnect the aerial cable, the power lead, the aerial feed, the speaker plugs, the earth lead and the light and memory feed (where applicable).

5 Push the retaining clips inwards to remove the removal tool from each side (see illustration).

31.5 Releasing radio extractor tool
31.5 Releasing radio extractor tool

6 The radio/cassette container box is secured by locking tabs. To remove the container box, bend back the tabs and withdraw the box (see illustration).

31.6 Radio/cassette container removal
31.6 Radio/cassette container removal

7 Refit in the reverse order of removal. The withdrawal tools do not have to be used, simply push the unit into its aperture until the securing clips engage in their slots.


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.