Volkswagen Golf/Jetta 2 manual

Oil pump - removal
Engine repair procedures - 1.05 and 1.3 litre pre August 1985 / Oil pump - removal


1 Remove the timing belt and crankshaft sprocket.

2 Remove the sump.

3 Unbolt and remove the pick-up tube and strainer from the oil pump and cylinder block.

Remove the flange gasket (see illustration).

16.3 Removing oil pump pick-up tube and strainer
16.3 Removing oil pump pick-up tube and strainer

4 Unscrew the bolts and withdraw the oil pump from the dowels on the front of the cylinder block. Note that the timing pointed bracket is located on the two upper central bolts and the timing belt guard on the two left-hand side bolts. Remove the gasket (see illustrations).

16.4a Removing oil pump . . .
16.4a Removing oil pump . . .

16.4b . . . and gasket
16.4b . . . and gasket


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.