Volkswagen Golf/Jetta 2 manual

Engine - refitting
Engine repair procedures - 1.05 and 1.3 litre pre August 1985 / Engine - refitting


Reverse the removal procedure given in Section 5 but note the following additional points:
a) When lowering the engine/gearbox unit into the vehicle, ensure that the driveshafts are aligned with the flanges b) Assemble the engine mountings loosely initially and tighten them only after the unit is central without straining the mountings (see illustrations)

40.1a Engine mounting bolt identification - see Specifications for torque
40.1a Engine mounting bolt identification - see Specifications for torque settings

40.1b Engine/transmission mounting bolt identification - see Specifications
40.1b Engine/transmission mounting bolt identification - see Specifications for torque settings

c) Adjust the clutch
d) Adjust the accelerator cable and, where applicable, the choke cable e) Refill the engine with oil and coolant


© 2018 www.vwgolfjetta2.ru. All Rights Reserved.